(919) 901-7015
About Us
Request a Quote
MacBrothers Mechanical LLC|702 North Fayetteville Ave, Dunn, NC 28334|(919) 901-7015

About MacBrothers Mechanical LLC
Serving Dunn and Beyond for Over Ten Years

Ever since our founding in 2012, MacBrothers Mechanical LLC has been committed to providing superior heating and cooling solutions to homeowners and businesses. In every job, we follow our three guiding values: hard work, dedication, and the pursuit of high-quality service. These values have pushed us to the forefront of Dunn’s HVAC industry. Contact us today to see what makes us so special!

Home Advisor badge Home Advisor badgeHome Advisor badge

A Trusted and Certified Team

Our exceptional work has earned us several certifications! [[8]] is a BBB-accredited business and an authorized Carrier HVAC dealer, and we also work with several other HVAC brand partners. With us, you can expect a higher level of service that only a certified team can provide. Trust our trained professionals to get your heating and cooling systems back in order.

Our Service Areas:

  • Raleigh
  • Garner
  • Cary
  • Willow Spring
  • Apex
  • Clayton
  • Holly Springs
  • Knightdale
  • Fuquay Varina
  • Angier
  • Morrisville
  • Wendell
  • New Hill
  • Coats
  • Wilson’s Mills
  • Durham
  • Buies Creek
  • And Beyond!

Our Plans
(Click to Expand)

Basic HVAC Protection Plan

Request a Quote

This program is designed for HVAC units 1-10 years old.

This plan protects homeowners' new HVAC investment through the labor & manufacturer warranty. This plan also enables [[8]] to optimize the HVAC system's efficiency and ensure the homeowner can maximize utility savings all year. 

It Pays to be a Member 100% Buy-Back Program Benefits:

  • Priority emergency service (during office hours only)
  • No overtime rate on labor for repairs
  • 10% discount on all replacement parts listed: Overloads, thermocouples, thermostat, reversing valve, relays, electronic controls, contactors, circuit boards, blower motors, capacitors, blower shaft & wheel, h & low-pressure switches, start devices, blower bearings, gas valve, controls, pilot burner, condenser fan motors, expansion valves, transformers
  • Spring 45-point A/C tune-up 
    • Clean condensing coil
    • Check operating pressures with gauges
    • Filter feplacement (customer supplied)
    • Check & tighten all electrical connections
    • Provide a tune-up check list & report on unit
    • Clear drain line with nitrogen
  • Fall 45-point furnace/heat pump tune-up 
    • Total furnace/heat pump inspection
    • Test all safety controls
    • Filter replacement/customer supplied
    • Clean & adjust burners/gas pressure
    • Provide tune-up check list & report on unit

Preferred HVAC Protection Plan

Request a Quote

This program is designed for HVAC units 10-15 years old.

This plan protects homeowners' new HVAC investment through the labor & manufacturer warranty. This plan also enables [[8]] to optimize the HVAC system's efficiency and ensure the homeowner can maximize utility savings all year.

This plan also includes a 10% discount on certain minor parts that assists homeowners when they are hit with unexpected labor & parts costs. Homeowners can rest easy knowing that these costs have been accounted for!

1-2 Hrs Labor: $157.45 - $314.90 (per each occurrence)

  • Examples of labor include any minor services, rewiring 24 voltage components, balancing airflow, adjusting gas valve, checking for leaks, or any service which does not include the sale of a part or takes longer than two hours to complete.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

1-2 lbs of Refrigerant (Service Rates): R22/$110.00 - $220.00 & R410a/$80 - $160.00 (per each occurrence)

  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most minor components: Up to $250.00 (per each occurrence)

  • Examples of minor components include the capacitor, contactor, defrost boards, gas valves, drain line, relays, transformers, programmable and non-programmable thermostats, thermocouples, overloads, high and low-pressure switches, non-ECM blower & condensing fan motors, thermostat wire, batteries, fuses, up to two feet of flue pipe, and Schrader valves.
  • **Note: all parts are priced with labor cost included. Labor cost will have an estimated time for repair, which is determined by the national average time to repair. The amount covered depends on how much coverage is left in homeowner protection account**

100% of Seasonal Maintenance: $199.00 - $268.00

  • Spring 45-point A/C or heat pump tune-up
    • Clean condensing coil
    • Check operating pressure with gauges
    • Filter replacement/customer supplied
    • Check and tighten all electrical connections
    • Provide a tune-up check list & report on unit
  • List Item
    • Total furnace inspection
    • Test all safety controls
    • Filter replacement/customer supplied
    • Clean & adjust burner assemblies
    • Provide a tune-up check list & report on unit
  •  **Note: Amount covered depends on how much coverage is left in homeowner protection account, also homeowner will have a Limited Buy-Out (50% of remaining balance) on a new system at the end of the Contract**
  • ***Also up to $193.98 of any miscellaneous fees, i.e., truck fee, torch fee, solder fee, trip to supply store, stocking fee, overtime rates, or anything that is absorbed into the cost of doing day to day business. This is a non-redeemable item.

Premium HVAC Protection Plan

Request a Quote

This program is designed for HVAC units 15+ years old and units with an estimated 2-3 years of life where replacement is imminent.

This plan protects homeowners' new HVAC investment through the labor & manufacturer warranty. This plan also enables [[8]] to optimize the HVAC system's efficiency and ensure the homeowner can maximize utility savings all year.

This plan also includes a 10% discount on certain minor parts that assists homeowners when they are hit with unexpected labor & parts costs. Homeowners can rest easy knowing that these costs have been accounted for!

1-4 hrs Labor: $157.45 - $629.80 (per each occurrence)

  • Examples of labor include any minor services, rewiring 24 voltage components, balancing airflow, adjusting gas valve, checking for leaks, or any service which does not include the sale of a part or takes longer than four hours to complete.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

1-4lbs of Refrigerant: R22/$110.00 - $440.00 and R410a/$80 - $320.00 (per each occurrence)

  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most Minor components: up to $250.00 (per each occurrence)

  • Minor components include the capacitor, contactor, defrost boards, gas valves, drain line, relays, transformers, programmable and non-programmable thermostats, thermocouples, overloads, high and low-pressure switches, non-ECM blower & condensing fan motors, thermostat wire, batteries, fuses, up to two feet of flue pipe, and Schrader valves.
  • **Note: all parts are priced with labor cost included. Labor cost will have an estimated time for repair, which is determined by the national average time to repair. The amount covered depends on how much coverage is left in homeowner protection account**

100% of Seasonal Maintenance: $199.00 - $268.00 (per each year four visits)

  • Spring 45-point A/C or heat pump tune-up
    • Clean condensing coil
    • Check operating pressure with gauges
    • Filter replacement/customer supplied
    • Check and tighten all electrical connections
    • Provide a tune-up check list & report on unit
  • Fall 45-point furnace/heat pump tune-up
    • Total furnace inspection
    • Test all safety controls
    • Filter replacement/customer supplied
    • Clean & adjust burner assemblies
    • Provide a tune-up check list & report on unit
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account**

Most Minor components: up to $250.00 (per each occurrence)

  • Major components include the compressor, condensing coil, thermal expansion valve or fixed metering device, evaporator coil, heat exchanger, reversing valve, or any component that requires the opening of a sealed system to atmospheric pressure, in which case the system must be vacuumed to acceptable micron levels.
  • **Note: Amount covered depends on how much coverage is left in homeowner protection account, also homeowner will have a Limited Buy-Out (100% of remaining balance minus fees) on a new system at the end of the Contract**
  • ***Also up to $456.25 of any miscellaneous fees, i.e., truck fee, torch fee, solder fee, trip to supply store, stocking fee, overtime rates, or anything that is absorbed into the cost of doing day to day business. This is a non-redeemable item.
BBB logo
ACCA Logo
Bosch logo
Bryant logo
Carrier logo
Payne logo

Request a Quote

Thank you for contacting MacBrothers Mechanical LLC. Someone will be in touch with you as soon as possible.
There was an error submitting the form. Please try again.
Copyright © 2024 MacBrothers Mechanical LLC, All rights reserved.
Privacy Policy
Terms Of Service